Not that long ago, most people didn’t think twice before grabbing a glass, and filling it up with tap water from their kitchen sink. But in the past few years, concerns over water quality have prompted people to look for safer alternatives. While some regions are plagued with tap water having a “bad taste” (usually due to water treatment agents like chlorine), other areas have more serious issues to deal with, like bacteria proliferation and industrial pollutants. While some people don’t mind the cost of purchasing bottled water, others have tried to be more economical, installing water filters on their tap faucets, or in many cases, outfitting large, expensive water filtration systems for their entire house. By understanding your family’s water needs, and doing a quick bit of research, you’ll be able to get a better idea of the quality of water in your area, and the steps you can take to ensure your family’s safety. 1. Do your research – Sites like http://water.usgs.gov and http://water.epa.gov/drink/ compile up-to-date statistics on a wide variety of water measurements in your area. 2. Look into cost – If you find yourself living in an area where the tap water consistently receives low marks, then it just makes good sense for you to explore your water filtration options. While there are many options to choose from, it really boils down to your peace of mind. Water Filtration Pitchers – The classic Brita pitcher is what usually comes to mind for most, but there are actually quite a few of these types of water filtration systems on the market now. And while they are definitely the most convenient kind of water filtration system, many don’t offer the same guarantees as some of the more advanced systems you have the option of choosing from. Not to say that these simple fill-and-pour systems should be overlooked, though. These pitchers are great for areas that have those “bad taste” kind of water issues. In these areas, many people are content with just a pitcher. However, you will have to buy replacement filters on a regular basis, and that often overlooked expense can leave many regretting that they didn’t just spend the money on a bigger system. Faucet Filters – These come in two varieties. One variety attaches to your actual faucet, and the other is installed under the sink, purifying the water before it reaches the faucet. Each have their pros and cons, but most of them are better equipped to remove a wider variety of contaminants than the classic water filtration pitcher. If you live in an area where hard water is a problem, many of these undersink varieties offer water softening options as well. These systems are ideal for people who are looking to only purify their sink water. Installing one of these in your kitchen will give your family superb drinking water, while providing you crisp, clean water for cooking purposes. Whole House Water Filters – These are attached at the “point of entry” water source of your house, and will filter all of your home’s water, from the shower to the ice maker. Many people find that this option is the best, as all of their water quality concerns have the capability of being met by only one filter. These systems require the least amount of maintenance, but have the heaviest price tag out of all of the systems outlined thus far. If you have municipal (city) water, then a decent whole house water filtration system will cost you an average of 700 dollars or more, and well water systems can set you back into the thousands. However, this is the best way to ensure that all of the water flowing into your home is safe, soft, and tasty. For more information on the kinds of water systems available to you, please visit http://www.consumerreports.org/cro/water-filters/buying-guide.htm]]>
Choosing a Water Filter
Water is essential for good health. Everyone agrees that you should drink more water but many people do not want to drink water straight from the tap. There are a variety of water filters but which one is right for you? Most are easy to install and maintain but which one should you choose? 1. First, test your water. The filtration system you need for your home depends upon the quality of your water supply. You can buy a test kit at your local hardware store. 2. Choose a water filtration system. There are several types available. Choose the system based upon the contaminants you’re trying to remove. Here are several types of filters you can choose from. Whole-House Filters: Whole-house filters are placed in the main water line entering your home. They are designed to remove sediment and rust particles from all of the water entering your home. Undersink Filters: Undersink filters remove bad tastes and odors from the water. Some may also remove lead, bacteria and sediment. Faucet-Mounted Filters: These filters connect directly to the faucet and require no plumbing connections. Some models are designed simply to remove bad tastes and odors, while more sophisticated units now have lead- and cyst-filtering capabilities. Countertop or Canisters Filters: These are the simplest of water filters available. There are different varieties but some of these filters remain on your counter, others connect to your spigot and the simplest of all require that water be poured through them to filter.]]>